APM – LZOS Apo 203mm/1800mm- CNC
The 203F/9 Apo cannot be called transportable, rather an observatory class instrument. Its color correction and optical performance are of the highest possible quality, simply color free and stunning. Under the best conditions, this Apo can show you the Encke Division of Saturn. It’s also a great imaging machine for CCD as well as medium format (with optional field flattener).
The tubes are made in Germany with non-compromising mechanical quality. The dew cap slides smoothly over the tube without producing any paint scratches. The focuser is a full 3.5″ size. It rotates smoothly and with zero image shift. This zero shift rotation is very important when your camera has already achieved its best focus and you would like to rotate it to the best position. The finder bracket has a quick exchange style screw system and is mounted on the rotatable focuser, which allows focuser rotation to bring the finder scope to the most comfortable observing position. The focuser comes with large anodized focuser knobs and moves extremely smooth when racking. The focuser comes with a screwed on 3.5″ / 2″ adapter and an 2″ / 1 1/4″ clamp ring style adapter to protect your eyepieces and diagonals from scratches. The tube rings are flat on both sides and offer five tapped 1/4 inch holes perpendicular to the tube line with the outer hole´s center to center spacing of 3.2″ and 2.362″. The center tapped hole can be used for different mounting plates with only a single center hole. The tube´s internal baffles are matched for a large usable photographic field. This system with the matched field flattener for full format CCD chips and film cameras up to 6×7 cm offers a image circle of appropriate size.
Since this Apo is also rather front heavy, when you place your order we offer the installation, to the rear inner portion of the tube, the proper weight for the balancing point of your choice. (Additional Cost through APM Telescopes)
Delivered with Order:
- Optical tube with retractable dew shield
- Set CNC tube rings
- 3.5″ Starlight Focuser with attached bracket for 50 mm viewfinder, both 360° rotatable
- 2 Steel rails with 4 magnetic balance weights
- Adapter 3.5″/2″ with new comprehensive eyepiece clamp
- 2″/1.25″ adapter with brass eyepiece clamp
- 2″ Extension tube 80 mm
- 2 Dust caps
For each CNC made tubes we can offer aluminium cases with preformed hard foam.